Contact Support


    Support Home Property Management System Modules Door Locks Salto

    Table of Contents

    Related Articles

    Popular Articles

    Salto

    Setup the Salto Door Lock module to encode keys with Salto ProAccess Space directly in RMS.

    Decision Tree

    The Salto Door Locks module enables integration with Salto ProAccess Space.
     

    • Information
    • Setup
    • Add Button

    Information

    The Salto Door Locks module enables integration with Salto ProAccess Space.

    The Salto ProAccess Space integration enables encoding keys or sending digital keys directly from the Reservation using the connected Salto Key Encoders.

    Activating the Door Lock module in RMS create a Service Request for RMS Customer Support to contact the Property and assist with module configuration.

    Key Encoders can be added in RMS after module activation to enable encoding keys directly from a Reservation.

    Keys can be created for an Area and/or Common Area to provide Guest access.

    Common Areas are shared spaces at the Property that can only be accessed with a key including after hours access from a car park or pool and gym facilities.

    The Salto Door Locks module requires the RMS MFI Processor which can be activated in the Module Market if not already in use at the Property.

    The MFI Processor must be installed on the same local computer as Salto ProAccess Space.

    The RMS Webservices Password is required to complete MFI Processor configuration and will be provided by RMS Customer Support as part of the Salto Door Locks module setup Service Request.

    The Area Description in RMS and the Area Name in Salto ProAccess Space must match to use the Door Locks module.

    The Key Encoder ID entered in RMS must match the Key Encoder ID in Salto ProAccess Space for the integration to work.

    Keys can be encoded on the Reservation using the  'Key' icon and the Key Serial Number will be recorded on the Reservation Audit Trail.


    Category, Area, Arrive, Depart, Reservation and Guest are default System Labels that can be customised.

    System Administrators will require Security Profile access to setup this feature.


    • Setup
    • Add Button

    Setup

    1. Go to the Module Market in the Side Menu of RMS.
    2. Select the Module Type as 'Access Control'.
    3. Select the 'Activate' Toggle on the Door Locks module with the Partner as 'Salto'.
    4. Read the Terms & Conditions.
    5. Select 'Activate Door Locks'.
    6. Navigate to the 'Activated' tab.
    7. Select the 'Lock' icon on the Door Locks module.
    8. Select the 'Configuration' icon for a Property.
    9. Enter the Daily Password provided by RMS Customer Support and select the 'Apply/Exit' icon.
    10. Install and configure the MFI Processor.
      1. Navigate to the 'Door Locks' tab.
      2. Select the Door Lock as 'Salto Pro Access'.
      3. Enter the Salto Endpoint.
      4. Select the Area Source as 'Area Name'.
      5. Save and Exit.
    11. Setup Key Encoders.
    12. Setup Common Areas.


    Activating the Door Lock module in RMS create a Service Request for RMS Customer Support to contact the Property and assist with module configuration.

    The Salto Door Locks module requires the RMS MFI Processor which can be activated in the Module Market if not already in use at the Property.

    The MFI Processor must be installed on the same local computer as Salto ProAccess Space.

    The RMS Webservices Password is required to complete MFI Processor configuration and will be provided by RMS Customer Support as part of the Salto Door Locks module setup Service Request.

    The Salto ProAccess Space username, password and endpoint provided by Salto are required to complete the module setup in RMS.

    The Area Description in RMS must match the Area Name in Salto ProAccess Space to complete Area Mapping.

    Key Encoder IDs entered in RMS must match the Key Encoder ID in Salto ProAccess Space.


    • Guide
    • Add Button

    Guide

    Go to the Module Market in the Side Menu of RMS.

    Select the Module Type as 'Access Control'.

    Select the 'Activate' Toggle on the Door Locks module with the Partner as 'Salto'.

    Read the Terms & Conditions.

    Select 'Activate Door Locks'.

    Navigate to the 'Activated' tab.

    Select the  'Lock' icon on the Door Locks module.

    Select the  'Configuration' icon for a Property.

    Enter the Daily Password provided by RMS Customer Support and select the  'Apply/Exit' icon.

    Install and configure the MFI Processor.

    Navigate to the 'Door Locks' tab.

    Select the Door Lock as 'Salto Pro Access'.

    Enter the Salto Endpoint and Port.

    Select the Area Source as 'Area Name'.

    Select 'Save' to store the changes made and 'Exit' to minimise the MFI.

    Setup Key Encoders.

    Setup Common Areas.

    Setup

    1. Go to the Module Market in the Side Menu of RMS.
    2. Select the Module Type as 'Access Control'.
    3. Select the 'Activate' Toggle on the Door Locks module with the Partner as 'Salto'.
    4. Read the Terms & Conditions.
    5. Select 'Activate Door Locks'.
    6. Navigate to the 'Activated' tab.
    7. Select the 'Lock' icon on the Door Locks module.
    8. Select the 'Configuration' icon for a Property.
    9. Enter the Daily Password provided by RMS Customer Support and select the 'Apply/Exit' icon.
    10. Install and configure the MFI Processor.
      1. Navigate to the 'Door Locks' tab.
      2. Select the Door Lock as 'Salto Pro Access'.
      3. Enter the Salto Endpoint.
      4. Select the Area Source as 'Area Name'.
      5. Save and Exit.
    11. Setup Key Encoders.
    12. Setup Common Areas.


    Activating the Door Lock module in RMS create a Service Request for RMS Customer Support to contact the Property and assist with module configuration.

    The Salto Door Locks module requires the RMS MFI Processor which can be activated in the Module Market if not already in use at the Property.

    The MFI Processor must be installed on the same local computer as Salto ProAccess Space.

    The RMS Webservices Password is required to complete MFI Processor configuration and will be provided by RMS Customer Support as part of the Salto Door Locks module setup Service Request.

    The Salto ProAccess Space username, password and endpoint provided by Salto are required to complete the module setup in RMS.

    The Area Description in RMS must match the Area Name in Salto ProAccess Space to complete Area Mapping.

    Key Encoder IDs entered in RMS must match the Key Encoder ID in Salto ProAccess Space.


    • Guide
    • Add Button

    Guide

    Go to the Module Market in the Side Menu of RMS.

    Select the Module Type as 'Access Control'.

    Select the 'Activate' Toggle on the Door Locks module with the Partner as 'Salto'.

    Read the Terms & Conditions.

    Select 'Activate Door Locks'.

    Navigate to the 'Activated' tab.

    Select the  'Lock' icon on the Door Locks module.

    Select the  'Configuration' icon for a Property.

    Enter the Daily Password provided by RMS Customer Support and select the  'Apply/Exit' icon.

    Install and configure the MFI Processor.

    Navigate to the 'Door Locks' tab.

    Select the Door Lock as 'Salto Pro Access'.

    Enter the Salto Endpoint and Port.

    Select the Area Source as 'Area Name'.

    Select 'Save' to store the changes made and 'Exit' to minimise the MFI.

    Setup Key Encoders.

    Setup Common Areas.


    Was this article helpful?

    Send Feedback

    Can’t find what you’re looking for?

    Let us help you!

    Contact Support